Control Modelling and Simulation
Developed and simulated the single-phase D-STATCOM model and control algorithm in MATLAB/Simulink to extract and compensate for the reactive and harmonic components of load current, ensuring sinusoidal grid current.
PROJECT 04 / B.TECH FINAL-YEAR PROJECT
Compensating reactive and harmonic currents.

A single-phase distribution STATCOM was designed, simulated, and implemented to compensate for reactive power and harmonic components in load current. The work involved MATLAB/Simulink control modelling and simulation, PCB development, isolated gate-driver power supply design, embedded algorithm implementation, and hardware development and testing. The developed prototype demonstrated the extraction and compensation of reactive and harmonic current components through hardware validation.
Developed and simulated the single-phase D-STATCOM model and control algorithm in MATLAB/Simulink to extract and compensate for the reactive and harmonic components of load current, ensuring sinusoidal grid current.
Designed and developed the required PCBs, including isolated power supplies for the gate drivers, and assembled the experimental hardware setup.
Implemented the control algorithm on an STM32F407VET6 development board and validated reactive power and harmonic compensation through hardware testing.
I would like to thank Mr. Haneesh A. S. for his invaluable support and guidance throughout the project.
The hardware setup achieved satisfactory separation of harmonic and reactive load-current components and successful compensation. The project brought together converter development, sensing and control, isolated supplies, and embedded implementation.
View the project on LinkedIn ↗